Odis 120 Litre Series 6000 Vertical Epoxy Coated Fertilizer Tank

DESCRIPTION

Odis fertilizer tanks series 6000 have been designed specifi cally for fertigation in agriculture. This system is simple, effi cient and trouble-free. The fertilizers are applied continuously during irrigation, either manually or controlled by an irrigation controller.

FEATURES

• Simple, effi cient and trouble-free operation
• Very large opening port facilitates filling of tank and prevents spilling of fertilizer
• Neoprene gasket ensures hermetic sealing and long life service
• Standard models contain P.E tube to increase the efficiency of fertilizer mixing
• Rubber coated metal legs isolate the filter from the ground to prevent corrosion and damage to the protective coating
• Vacuum breaker (kinetic air valve) installed at tank outlet
• Designed and manufactured to achieve the highest standard of quality and finish
• The fertilizer tanks have a 120 micron protective coating of extra durable polyester applied electrostatically and oven cured on a zinc-phosphate layer for maximal anti-corrosion protection

APPLICATIONS

• Designed specifi cally for fertigation in agriculture
• Standard models apply fertilizer on the quantitative principle

SPECIFICATIONS

• Maximum recommended working pressure: 800kPa
• Maximum pressure: 1000kPa
• Installation: Vertical

APPROXIMATE FERTILIZING TIMES (HOURS)

• The fertilizing times are for general use only, and for fertilizers easily soluble in water.
• Actual times may be altered according to field conditions.

• Column 1: Indicates the pressure diff erence between inlet A and outlet B of the fertilizer head.
• Column 2 - 5: Indicate the time in hours, of fertilizing (until concentration becomes negligible). Usually, fertilizing times are determined according to type of fertilizer, crops and experience.
• Note: The fertilizing time is determined by the pressure loss.